Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Jul 17
th
, 2024, 5:32pm
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Design Languages
›
Verilog-AMS
› annotating a verilog-a(ms) variable onto a symbol in Cadence
‹
Previous topic
|
Next topic
›
Pages: 1
annotating a verilog-a(ms) variable onto a symbol in Cadence (Read 2452 times)
e102
New Member
Offline
Posts: 1
annotating a verilog-a(ms) variable onto a symbol in Cadence
Aug 17
th
, 2011, 6:34am
Hi,
I am interested in creating a symbol in Cadence which will have a label on it which is the value of a variable inside the verilog-a code of that block after a simulation has run.
Does anyone know if it is possible to do this?
Many Thanks
Back to top
IP Logged
boe
Community Fellow
Offline
Posts: 615
Re: annotating a verilog-a(ms) variable onto a symbol in Cadence
Reply #1 -
Aug 17
th
, 2011, 12:48pm
e102,
If you have the labels
cdsParam(1), cdsParam(2), ...
in your symbol, you can select with CDF parameter
paramLabelSet
which parameters should be displayed.
B O E
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
»» Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.