loose-electron
Senior Fellow
![* *](https://designers-guide.org/forum/Templates/Forum/default/starsilver.gif) ![* *](https://designers-guide.org/forum/Templates/Forum/default/starsilver.gif) ![* *](https://designers-guide.org/forum/Templates/Forum/default/starsilver.gif) ![* *](https://designers-guide.org/forum/Templates/Forum/default/starsilver.gif) ![* *](https://designers-guide.org/forum/Templates/Forum/default/starsilver.gif)
Offline
![](https://designers-guide.org/forum/avatars/fredflinstone.gif)
Best Design Tool = Capable Designers
Posts: 1638
San Diego California
|
the parasitics of your board, the traces on the board, the RLC of the package can all be included into your simulation to determine if the methods proposed will work at the desired frequency.
You need to look up the coefficients of capacitance and inductance for the proposed PCB material and estimate those components in a simulation.
|