The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jul 17th, 2024, 3:15pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Analog Design › DC/DC converter
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
DC/DC converter (Read 1582 times)
night1984
New Member
*
Offline



Posts: 1
DC/DC converter
Mar 22nd, 2013, 11:04am  
I was wondering if anyone knows if it's possible to for a DC/DC converter to take a 15V input at 1 amp and convert that to a 180V output.
Back to top
 
 
View Profile   IP Logged
loose-electron
Senior Fellow
******
Offline

Best Design Tool =
Capable Designers

Posts: 1638
San Diego California
Re: DC/DC converter
Reply #1 - Mar 22nd, 2013, 4:35pm  
there are circuit methods to do that.
Can you buy it off the shelf?
Perhaps not.

If its something you need designed, contact me.
Back to top
 
 
Jerry Twomey
www.effectiveelectrons.com
Read My Electronic Design Column Here
Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.