The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Aug 17th, 2024, 4:13pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Analog Design › Determine poles , zeros,UGBW and Slew Rate of two stage folded cascod
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Determine poles , zeros,UGBW and Slew Rate of two stage folded cascod (Read 1777 times)
HaAf
New Member
*
Offline



Posts: 3
Determine poles , zeros,UGBW and Slew Rate of two stage folded cascod
Mar 30th, 2013, 2:47am  
I wanna design a two stage folded Cascode OTA(single ended)
The 1st stage is folded Cascode and the 2nd is common source.
But I don't know what I do?
I need to determine poles and zeros and UGBW but I don't know how I can determine them?
are there any book or paper that i can find them?

tnx a lot
Back to top
 
 
View Profile   IP Logged
indysjl
New Member
*
Offline



Posts: 8
Minneapolis
Re: Determine poles , zeros,UGBW and Slew Rate of two stage folded cascod
Reply #1 - Apr 2nd, 2013, 8:36am  
You might try

CMOS Circuit Design, Layout, and Simulation

by R. Jacob Baker
Back to top
 
 
View Profile indysjl   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.