Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

Apr 28^th, 2024, 3:13pm

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Design › RF Design › RF Baseband filter with 100MHz-1GHz bandwidth

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

RF Baseband filter with 100MHz-1GHz bandwidth (Read 2769 times)

LazyDesigner Junior Member Offline Posts: 15 South Korea	RF Baseband filter with 100MHz-1GHz bandwidth Dec 17^th, 2013, 12:37am 1. What kind of implementation for a low pass filter having programmable bandwith from 100MHz-1GHz should be chosen to meet this bandwidth spec. for wireless communication. 2. What If the type of filter is BPF with 2GHz centre frequency and same programmable bandwidth as that of LPF in #1.
Back to top	IP Logged

loose-electron Senior Fellow Offline Best Design Tool = Capable Designers Posts: 1638 San Diego California	Re: RF Baseband filter with 100MHz-1GHz bandwidth Reply #1 - Jan 3^rd, 2014, 2:50am Lots more details needed.
Back to top	Jerry Twomey www.effectiveelectrons.com Read My Electronic Design Column Here Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical IP Logged

LazyDesigner Junior Member Offline Posts: 15 South Korea	Re: RF Baseband filter with 100MHz-1GHz bandwidth Reply #2 - Aug 23^rd, 2015, 8:51pm Hello, If we talk about LPF then OIP3=15dBm, NF=15dB, what else spec you want for this? Regards, Pravesh
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.