Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Jul 16
th
, 2024, 3:37pm
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Other CAD Tools
›
Physical Verification, Extraction and Analysis
› EM Simulation
‹
Previous topic
|
Next topic
›
Pages: 1
EM Simulation (Read 4234 times)
AZADBAKHT
Community Member
Offline
Posts: 40
EM Simulation
Aug 21
st
, 2014, 5:54am
Hi All
i need to EM Simulation software for analyze inductor for OSC in CMOS-90nm technology.
really i need to free download.
i downloaded the sonnet software but this software has been cmos-180nm Tech.!!
can anyone help me and give me a address for download EM simulation?l
Back to top
IP Logged
aaron_do
Senior Fellow
Offline
Posts: 1398
Re: EM Simulation
Reply #1 -
Aug 21
st
, 2014, 8:23am
Hi,
as far as the characteristics of the inductor are concerned, the important part is knowing the conductor thickness and material and how high above the substrate it is. I don't think the other details will have too much effect.
regards,
Aaron
Back to top
there is no energy in matter other than that received from the environment - Nikola Tesla
IP Logged
AZADBAKHT
Community Member
Offline
Posts: 40
Re: EM Simulation
Reply #2 -
Aug 21
st
, 2014, 11:03pm
Hi
ok so can i use the sonnet software with gpdk180nm?
but i need to knowing the three characteristic cited of you.
Regards
Mostafa
Back to top
IP Logged
irisaru
New Member
Offline
Posts: 7
Re: EM Simulation
Reply #3 -
Sep 17
th
, 2014, 6:33am
Hi,
I think you can find these characteristic inside PDK documents, it usually shows how high the substrate, the metal thickness, resistance sheet,...
Thanks,
Irisaru
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
»» Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.