The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 29th, 2024, 6:14pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Analog Design › Filtering wide width pulses
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Filtering wide width pulses (Read 1629 times)
Rosh
Junior Member
**
Offline



Posts: 21
Filtering wide width pulses
Aug 28th, 2015, 9:00pm  
Hello,

I have two different type of digital pulses flowing out of a gate.  

Narrow width and wide width pulse : See pics below.  







How do I filter out the wide width pulses and allow only the narrow width pulses to pass through?
Back to top
 
 
View Profile   IP Logged
loose-electron
Senior Fellow
******
Offline

Best Design Tool =
Capable Designers

Posts: 1638
San Diego California
Re: Filtering wide width pulses
Reply #1 - Sep 2nd, 2015, 1:04pm  
why filter? this looks like a logic design problem
Back to top
 
 
Jerry Twomey
www.effectiveelectrons.com
Read My Electronic Design Column Here
Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.