The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 4th, 2024, 3:30pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Analog Design › double tail comparator
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
double tail comparator (Read 2397 times)
madhuri madasu
New Member
*
Offline



Posts: 1
double tail comparator
Feb 25th, 2016, 11:55am  
hi.......
        can anyone tell about how to take the W/L ratios for double tail comparator......?
i'm using gpdk 180nm technology....
Thank you.......
Back to top
 
 
View Profile   IP Logged
loose-electron
Senior Fellow
******
Offline

Best Design Tool =
Capable Designers

Posts: 1638
San Diego California
Re: double tail comparator
Reply #1 - Feb 28th, 2016, 1:50pm  
clarify your question please
Back to top
 
 
Jerry Twomey
www.effectiveelectrons.com
Read My Electronic Design Column Here
Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical
View Profile WWW   IP Logged
Ken Kundert
Global Moderator
*****
Offline



Posts: 2384
Silicon Valley
Re: double tail comparator
Reply #2 - May 3rd, 2016, 1:38am  
Off-Topic replies have been moved to this Topic.
Back to top
 
 
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.