The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 16th, 2024, 4:59pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Other CAD Tools › Physical Verification, Extraction and Analysis › Deep nwell devices in tsmc65nm
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Deep nwell devices in tsmc65nm (Read 2935 times)
mixed_signal
Senior Member
****
Offline



Posts: 183
Deep nwell devices in tsmc65nm
Apr 02nd, 2016, 10:39pm  
Hi, The deepnwell devices in tsmc65 layout cell has the deepnwell rectangle but no nwell surrounding it. Is it OK to just draw nwell rectangle (path) manually around it? It  passes lvs. Is there any other special layer needed to be added for nwell to get fabricated?
Back to top
 
 
View Profile   IP Logged
Maks
Community Member
***
Offline



Posts: 52
San Jose
Re: Deep nwell devices in tsmc65nm
Reply #1 - Apr 14th, 2017, 5:06pm  
To get a solid contact to deep nwell, you need to draw nwell ring around it, along with nplus and OD (diffusion) with contacts filling the whole ring (M1 above, etc.).

Max
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.