The Designer's Guide Community
Forum
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Mar 28th, 2024, 10:46pm
Pages: 1
Send Topic Print
how to simulate vco with injection locking (Read 1995 times)
alialialialiali
New Member
*
Offline



Posts: 3

how to simulate vco with injection locking
Apr 23rd, 2016, 7:12am
 
hi,
how to simulate vco with injection locking and get output frequency and phase noise?
what are simulation tools for calculating output frequency and phase noise?
is there any example?
Back to top
 
 
View Profile   IP Logged
Forum Administrator
YaBB Administrator
*****
Offline



Posts: 145

Re: how to simulate vco with injection locking
Reply #1 - Apr 23rd, 2016, 7:09pm
 
Specify tstab sufficiently large to get oscillator into lock, then run a 'driven' PSS/PNoise. Just as you would with a PLL.

Please do not put simulation questions in the design boards.

-Ken
Back to top
 
 
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.