Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Oct 6
th
, 2024, 1:53am
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Simulators
›
RF Simulators
› how to simulate vco with injection locking
‹
Previous topic
|
Next topic
›
Pages: 1
how to simulate vco with injection locking (Read 2129 times)
alialialialiali
New Member
Offline
Posts: 3
how to simulate vco with injection locking
Apr 23
rd
, 2016, 7:12am
hi,
how to simulate vco with injection locking and get output frequency and phase noise?
what are simulation tools for calculating output frequency and phase noise?
is there any example?
Back to top
IP Logged
Forum Administrator
YaBB Administrator
Offline
Posts: 145
Re: how to simulate vco with injection locking
Reply #1 -
Apr 23
rd
, 2016, 7:09pm
Specify tstab sufficiently large to get oscillator into lock, then run a 'driven' PSS/PNoise. Just as you would with a PLL.
Please do not put simulation questions in the design boards.
-Ken
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
»» RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.