Debdut
Junior Member
![* *](https://designers-guide.org/forum/Templates/Forum/default/starblue.gif)
Offline
Posts: 10
|
I have a multiphase frequency divider that divides frequency by (67+1/6), (67+2/6),.... There are six equispaced phases at its input. The output is periodic but there are some picosecond order error in the consecutive time periods, i.e. the periods are like T+Δt1, T-Δt2, etc. However the ouput is exactly periodic with period of 6T. Is there a way to remove the picosecond errors by adding an external circuit so that the period comes down to original T.
|