The Designer's Guide Community
Forum
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 20th, 2019, 3:34pm
Pages: 1
Send Topic Print
how to consider reference voltage's noise impact on adc output? (Read 973 times)
vincentleung
New Member
*
Offline



Posts: 2

how to consider reference voltage's noise impact on adc output?
Dec 24th, 2017, 11:37pm
 
hi, guys.
    in our common sense, it seems like that adc reference noise should be much smaller than 1LSB. but how does reference noise contribute to adc output noise? how to calculate it in a right way?  adc output noise introduced by reference noise should be a convolution of input signal and reference noise in frequency domain?  anybody can explain it ? thanks a lot.
Back to top
 
 
View Profile   IP Logged
davidshw
New Member
*
Offline



Posts: 9
China
Re: how to consider reference voltage's noise impact on adc output?
Reply #1 - Jan 1st, 2018, 8:46pm
 
Back to top
 
 
View Profile   IP Logged
Jacki
Senior Member
****
Offline



Posts: 213

Re: how to consider reference voltage's noise impact on adc output?
Reply #2 - Apr 4th, 2018, 11:33pm
 
I think the noise from reference voltage should be considered as the rms noise, so use the kT/C analysis at the input of the ADC, not the output.
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
Copyright 2002-2019 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.