The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Jan 17th, 2025, 3:00am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Modeling › Transmission Lines and Other Distributed Devices › EM simulation with high resistivity substrate in CMOS IC technology
‹ No topic | Next topic ›
Pages: 1
Send Topic Print
EM simulation with high resistivity substrate in CMOS IC technology (Read 673 times)
vlsi_design
Junior Member
**
Offline



Posts: 23
EM simulation with high resistivity substrate in CMOS IC technology
Feb 04th, 2023, 7:56pm  
Hi, Is there a way to account for high resistivity substrate in EM simulation software? I am designing an inductor in a CMOS process and using high resistivity substrate to get high Q factor. I have momentum and emx software.
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ No topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2025 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.