The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 29th, 2024, 8:53pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Analog Design › Cadence Design Tool - Layout routing
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Cadence Design Tool - Layout routing (Read 1710 times)
Anthony Wong
Guest
Cadence Design Tool - Layout routing
Oct 09th, 2004, 1:29pm  
I am using the cadence design tool to do the schematic. Do any body can help me to make the schematic become layout thru the layout routing (layout XL)? Please reply.

Thanks.
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.