The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 19th, 2024, 8:42pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › RF Simulators › Varactor simulation
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Varactor simulation (Read 3659 times)
Beny
New Member
*
Offline



Posts: 2
Varactor simulation
Jul 03rd, 2005, 3:53pm  
Hi All,
Could you please help with how to simulate (using Spice or SpectreRF) the capacitance -voltage characteristics of a NMOS or a PMOS device.
Thanks,
Ben,
Back to top
 
 
View Profile   IP Logged
Ken Kundert
Global Moderator
*****
Offline



Posts: 2384
Silicon Valley
Re: Varactor simulation
Reply #1 - Jul 3rd, 2005, 9:17pm  
Take a look at http://www.designers-guide.org/Modeling/varactors.pdf.

-Ken
Back to top
 
 
View Profile WWW   IP Logged
Beny
New Member
*
Offline



Posts: 2
Re: Varactor simulation
Reply #2 - Jul 4th, 2005, 1:47am  
Ken,
Thanks a lot for the link. It is a great source of information.
Ben,
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.