Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

May 11^th, 2024, 12:31am

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Design › Mixed-Signal Design › step response of the current mode folding amp

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

step response of the current mode folding amp (Read 2769 times)

Beetroots New Member Offline When all else fails, read the instructions Posts: 1	step response of the current mode folding amp Aug 24^th, 2005, 6:09am i have designed a current mode folding amplifier for a folding factor of 8 using .25u technology. now i want to see the step response of this circuit, how do i check? awaiting for reply beetroots
Back to top	IP Logged

Paul Community Fellow Offline Posts: 351 Switzerland	Re: step response of the current mode folding amp Reply #1 - Aug 26^th, 2005, 12:46pm I guess you should listen to your slogan and read the instructions ;) You find all you need on theory in the textbooks and on the simulation in the users guide... Hint: try a transient simulation. Paul
Back to top	IP Logged

jbdavid Community Fellow Offline Posts: 378 Silicon Valley	Re: step response of the current mode folding amp Reply #2 - Oct 3^rd, 2005, 11:11pm A paper I wrote for cadence is a decent starting point (given that its getting older) for simulating opamps.. look at www.cadence.com and use the search terms "Functional Verification Opamp" you should find the white paper on the site.. Jbdavid
Back to top	jbdavid Mixed Signal Design Verification IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.