Hi, Navin,

You need get the package model from your package house to simulate accurately.

The transmission line model can be extracted using a lumped model. You can choose a lossless transmission line model, too.

Since the pad has parasitic capacitance which depends on its layout and ESD design, you'd better simulate with a real pad circuitry.  :)


Best regards,
Yawei

Hi, Navin,

Please refer to any SPICE or spectre manual for the transmissioni line model.


Best regards,
Yawei

Hi all ,
I do have a question on LVDS transmitter design . I am using a common mode feedback circuit to stabilize the output common mode voltage and I want to do the stability analysis for this feedback loop.For that I need to get the pole at the output of the LVDS driver .Can anyone suggest what all the resistances and capacitances that come into play while calculating this pole !!!!!