The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 5th, 2024, 4:31am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Other CAD Tools › Entry Tools › Spectre netlist as cell view
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Spectre netlist as cell view (Read 3591 times)
shauptma
New Member
*
Offline



Posts: 1
Spectre netlist as cell view
May 02nd, 2007, 4:34am  
In Cadence 5.1.41 is there a way to import a Spectre netlist as a cell view? (Something like netlist view). Or is it possible to convert a Spectre netlist to a schematic view?

Thanks, Stefan.
Back to top
 
 
View Profile   IP Logged
Andrew Beckett
Senior Fellow
******
Offline

Life, don't talk to
me about Life...

Posts: 1742
Bracknell, UK
Re: Spectre netlist as cell view
Reply #1 - May 8th, 2007, 7:30am  
In IC610 it's possible to import a spectre netlist and create a schematic. But that was new in IC610...

The closest you have in IC5141 is to convert (using your favourite text editor, or a hand-written perl script, say) the netlist to CDL format, and then use File->Import->CDL to create a schematic.

Regards,

Andrew.
Back to top
 
 
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.