The Designer's Guide Community
Forum
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Aug 18th, 2024, 3:13am
Pages: 1
Send Topic Print
[Request] Tutorial- notes on noise analysis (Read 2257 times)
raduga
Junior Member
**
Offline



Posts: 11

[Request] Tutorial- notes on noise analysis
Jun 20th, 2007, 1:49am
 
Dear All,

Can you please help me to get any simple tutorial / notes
on the topic of noise analysis for following few basic
MOS amp structures

1. Common Gate
2. Source Follower
3. Common Source
4. Common Source with Degenerated source resistor
5. Cascode amplifier

I have tried it from Razavi's book and Backer's book. I found
baker's one quite simple but the exhaustive analysis was not
there for all of these amplifiers.

Razavi's method didn't convinced my intution that much as
Baker's method. Therefore, I am in the need of
some other good reference for this one. If you
have any other than these two please let me know.
So, If you have any other tutorial/notes on this topics
please forward it ..

TIA

Regards

Raduga
Back to top
 
 
View Profile   IP Logged
rajks1982
New Member
*
Offline



Posts: 8
Moscow, Idaho
Re: [Request] Tutorial- notes on noise analysis
Reply #1 - Jun 29th, 2007, 12:30pm
 
Check this website by on of the Prof's at Univ of Idaho. The attachment is from there.

--
R
Back to top
 

-- Rajeev
View Profile   IP Logged
rajks1982
New Member
*
Offline



Posts: 8
Moscow, Idaho
Re: [Request] Tutorial- notes on noise analysis
Reply #2 - Jun 29th, 2007, 12:31pm
 
Back to top
 
 

-- Rajeev
View Profile   IP Logged
Pages: 1
Send Topic Print
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.