Parveen
New Member
Offline
Posts: 4
Indore
|
Re: In designing a comparator with input offset cancellation technique, we need to design switches. There are three switches: one connecting the input to output(unity gain feedback), second connecting the input to reference voltage and third connecting to the inputs to be compared. Out of these three the first is placed to the right plate of the capacitor and the other two to the left of the capacitor near the inputs. While designing the amplifier we do the dc analysis and adjust the dc voltages. After obtaining these values, when a capacitor is introduced at the inputs, as soon as the switch for the feedback is connected, due to some leakage current through the switch(transmission gate), the capacitor acquires some charge at the right plate near inputs and settles on to that dc value changing the operating points. How should I avoid these leakage currents????
|