The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 2nd, 2024, 2:04pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Modeling › Behavioral Models › CMOS Image Sensor modeling
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
CMOS Image Sensor modeling (Read 3022 times)
Nimrod Ben-Ari
New Member
*
Offline



Posts: 9
Israel
CMOS Image Sensor modeling
Dec 26th, 2011, 1:27am  
Hi,
I'm doing Image Sensor design and I need to model for a 4T Active Pixel CMOS Image Sensor. I have I-V curves for the source follower but I'm not sure how to use them for the model.
What I need is, prefreably VerilogA, behavioral model example and an explanation on how to use the information I have.

Thanks,
* Nimrod Ben-Ari
Back to top
 
 
View Profile   IP Logged
AndyBetts
New Member
*
Offline



Posts: 1
Re: CMOS Image Sensor modeling
Reply #1 - Feb 14th, 2012, 1:34pm  
I do consulting work with Asygn and this company has an analog system-level simulation tool specifically for pixel arrays: http://www.asygn.com/SoftAnalogArrays.php

'Hope that this is of help.
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.