The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Sep 8th, 2024, 3:24pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Analog Design › How to perform DC Fault test for RCBOs.
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
How to perform DC Fault test for RCBOs. (Read 726 times)
viswas
Junior Member
**
Offline



Posts: 12
How to perform DC Fault test for RCBOs.
Dec 30th, 2011, 8:51am  
Can anybody explain me,How to perform DC fault test for RCBOs.?
Back to top
 
 
View Profile   IP Logged
raja.cedt
Senior Fellow
******
Offline



Posts: 1516
Germany
Re: How to perform DC Fault test for RCBOs.
Reply #1 - Dec 30th, 2011, 9:05am  
hello,
what do you mean by RCBO?

Thanks,
Raj.
Back to top
 
 
View Profile WWW raja.sekhar86   IP Logged
viswas
Junior Member
**
Offline



Posts: 12
Re: How to perform DC Fault test for RCBOs.
Reply #2 - Dec 30th, 2011, 9:30am  
Hi Raj,

Thanks for the reply.

RCBO :Residual Current Breaker with Overload Protection.The one of the test i suppose to do DC fault test.How to make test set up to do this.If you have any idea can you guide me please?
Back to top
 
 
View Profile   IP Logged
loose-electron
Senior Fellow
******
Offline

Best Design Tool =
Capable Designers

Posts: 1638
San Diego California
Re: How to perform DC Fault test for RCBOs.
Reply #3 - Dec 30th, 2011, 3:39pm  
Is this some kind of overcurrent protection circuit?

Need to define the question better, specifics of circuits etc.
Back to top
 
 
Jerry Twomey
www.effectiveelectrons.com
Read My Electronic Design Column Here
Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.