Designer’s Guide Community

‹ Previous topic | Next topic ›

Pages: 1

capacitive voltage divider circuit query (Read 1729 times)

eternity

Junior Member

Offline

Posts: 28

capacitive voltage divider circuit query
May 11^th, 2014, 7:54am

Hi,
I have a small doubt regarding capacitive voltage divider(2 capacitors in series) circuit. Will the votlage gets divided by half in the middle arm if I supply a voltage source in the top end of top capacitor? Theoretically, it should be possible but I am not able to see that happening in the CAD tool I am using.

I am not sure whats happening. Can anyone here help me out

Eternity

IP Logged

loose-electron Senior Fellow Offline Best Design Tool = Capable Designers Posts: 1638 San Diego California	Re: capacitive voltage divider circuit query Reply #1 - May 11^th, 2014, 9:54am You need to have a DC path to the center node. Without that it will not simulate easily.
Back to top	Jerry Twomey www.effectiveelectrons.com Read My Electronic Design Column Here Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical IP Logged

eternity Junior Member Offline Posts: 28	Re: capacitive voltage divider circuit query Reply #2 - May 11^th, 2014, 12:31pm I figured out the issue through your help. Thanks.
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›