The Designer's Guide Community
Forum
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Mar 28th, 2024, 4:39pm
Pages: 1
Send Topic Print
TCAD Sentaurus - incomplete ionization (Read 2394 times)
imad
New Member
*
Offline



Posts: 1

TCAD Sentaurus - incomplete ionization
Sep 12th, 2014, 8:30am
 
I'm trying to simulate a pDBR structure of AlGaAs with the incomplete ionization model activated. While activating the model itself affects the simulation result and I see the doping concentration and IV curve affected, changing the model parameters ("Ionization") of the AlGaAs materials seems not to be taken into account. I made sure that in the log file the standard values (called "Shallow Trap") are actually replaced by the values I provide, but still they have no effect whatsoever on the result. I'm suspecting the model all together is faulty in Sentaurus. any ideas?
thanks!
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.