Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Aug 18
th
, 2024, 6:21pm
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Modeling
›
Semiconductor Devices
› How to fit the knee voltage of Vbe of BJT ?
‹
Previous topic
|
Next topic
›
Pages: 1
How to fit the knee voltage of Vbe of BJT ? (Read 3676 times)
vjoshi
New Member
Offline
Posts: 5
How to fit the knee voltage of Vbe of BJT ?
Aug 05
th
, 2005, 2:40pm
I am now able to model and get the Ib vs Vbe curve but the knee voltage of Vbe of the measured BJT model is 2.7 V and I am getting .8 V for my pspice model. What parameters should I change to get the knee voltage of Vbe to 2.7 V ?
Back to top
IP Logged
vjoshi
New Member
Offline
Posts: 5
How to fit the knee voltage of Vbe of BJT ?
Reply #1 -
Aug 11
th
, 2005, 6:19am
I am able to model the Ib vs Vbe curve of the real BJT with the pspice model of BJT. I changed the values of ISE and ISC. I wanted to know if I could reduce the slope of the curve between 0 V and 2.7 V to zero so that it matches perfectly with the real BJT Ib vs Vbe curve.
Thanks
Back to top
IP Logged
Geoffrey_Coram
Senior Fellow
Offline
Posts: 1999
Massachusetts, USA
Re: How to fit the knee voltage of Vbe of BJT ?
Reply #2 -
Aug 18
th
, 2005, 10:07am
You can try changing the emission coefficients or perhaps the series resistances (rb, re). 2.7V is a pretty high voltage for the knee. Most diodes have a knee of 0.5 to 0.8 V. Are you sure your measurements are right?
Back to top
If at first you do succeed, STOP, raise your standards, and stop wasting your time.
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
»» Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.