The Designer's Guide Community
Forum
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 18th, 2019, 11:59pm
Pages: 1
Send Topic Print
Load limit on the TIEHI and TIELO cells (Read 607 times)
pkd
Junior Member
**
Offline



Posts: 25
India
Load limit on the TIEHI and TIELO cells
Feb 06th, 2018, 7:36pm
 
When I see the .lib of a TIEHI or TIELO cell, I see some maximum capacitance load limit at the output pin. Since there is no transition requirement for this cell, I am wondering why does this limit exist and how is this limit calculated.
The TIEHI cell is nothing but a diode connected PMOS, source connected to VDD, drain/gate connecting to the gate of an NMOS. Source of the NMOS at ground, drain to the gate of a PMOS whose source is VDD and drain is out output pin.
Back to top
 

TIEHI.JPG
View Profile   IP Logged
Pages: 1
Send Topic Print
Copyright 2002-2019 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.